Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

E1 Over IP Interconnect for Voice and Data

The IPTube-E1 encapsulates full and fractional E1 and TDM circuits, along with their framing and signaling bits, into IP packets. The IPTube's E1 Over IP connection provides for the transparent interconnection of PBXs, Telecom Switches and E1 based communication systems via LANs, WANs, MANs, and Wireless Ethernet. WAN Protocols, such as PPP and Frame Relay, that utilize HDLC framing are able to be encapsulated with HDLC Over IP.                  
                                                                           
       IPTube Brochure in PDF Format


Transparent Interconnect
IPTube-E1 transparent operation maintains the proprietary signaling required to support PBX features such as call conferencing, call forwarding, caller ID and SS7. Legacy phone equipment investment is preserved. Transparent support for Modem, Fax, or Data circuits.
The IPTube-E1 has an E1 interface that connects directly to the E1/DS1 interface of Phone Systems or E1 Data Communication Equipment. An Ethernet interface connects to the LAN.

Lossless Data Compression
The IPTube-E1C detects idle/redundant data within each DS0 resulting in a 40 to 1 bandwidth savings. TDM Over IP WAN bandwidth is not consumed by silent or redundant circuits and voice quality is not effected.   Note: Compression only supported with IPTube-E1C model. 


Technical Specifications
IPTubeManual in PDF Format

LAN Network Interface:
One 10BaseT Ethernet

E1 Over IP Protocol:
• TDM Over IP
• Circuit Extension Over IP - CESOIP
• HDLC Over IP - HDLCOIP

• Frames Per Packet Configurable 8 to 40
   1 millisecond 8 E1 frames
    5 millisecond 40 E1 frames


Quality of Service:

Configurable IP Type of Service Bits
UDP Encapsulation IANA Port 3175

E1/Fractional E1 Specifications:
· Framing - CRC4 or FAS or UNFRAMED
· Coding - HDB3 or AMI
· Supports DS0 assignments from 1 to 31

Regulatory:
· Safety -IEC60950 Third Edition
              CB TEST CERTIFICATE
· EMC - EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

· Telecom - TBR12, TBR13
· CE

LAN Network Protocols Supported:
IP, TCP, UDP, ICMP, BOOTP

TFTP Upgrade Capable (Flash ROMs):
IPTube is operational during upgrade

Management:
Telnet support with Edit and Paste Templates
Console Port for Out of Band Management

SNMP support (MIB I, MIB II)

Remote configuration, monitoring, & reset

Console Port:
RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

24VAC, 1.0A; International Adapters Available
24-36 VDC Optional
-48 VDC Optional

Dimensions:
9" (L) x 7.3" (W) x 1.50" (H)

AC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: E1/DS1 Interface for connection to a PBX, Telecom Switch/Multiplexor



Console Port Connector
RJ 45 to DB 9 Female Adapter provided
24 VAC, 1.0A
  International Adapters Available

DC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: E1/DS1 Interface for connection to a PBX, Telecom Switch/Multiplexor


Console Port Connector
RJ 45 to DB 9 Female Adapter provided
15-26 VDC, 1.0A
Optional -48VDC, 0.25A 
  International Adapters Available

 

Engage Communication 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 Fax: (831) 688-1421 sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM