Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

T1 Over IP Interconnect for Voice and Data

The IPTube-T1 encapsulates full and fractional T1 and TDM circuits, along with their framing and signaling bits, into IP packets. The IPTube's T1 Over IP, T1 Over Ethernet connection provides for the transparent interconnection of PBXs, Telecom Switches and T1 based communication systems via LANs, WANs, MANs, and Wireless Ethernet. WAN Protocols, such as PPP and Frame Relay, that utilize HDLC framing are able to be encapsulated with HDLC Over IP.                  
                                                                                  IPTube Brochure in PDF Format


Transparent Interconnect
IPTube-T1 transparent operation maintains the proprietary signaling required to support PBX features such as call conferencing, call forwarding, caller ID and SS7. Legacy phone equipment investment is preserved. Transparent support for Modem, Fax, or Data circuits.
The
IPTube-T1 has a T1 interface that connects directly to the T1/DS1 interface of Phone Systems or T1 Data Communication Equipment. An Ethernet interface connects to the LAN.

IP Cellullar Back Haul
IPTube•T1s are used to provide transparent interconnection of the base stations (BTSs), base station controllers (BSCs) and mobile switching centers (MSCs) over IP Ethernet packet-switched networks. Supported access media include fiber, coax and fixed wireless. Cellular phone service providers are able to save substantially by converting to a packet switch network from circuit TDM lease lines.

 

Lossless Data Compression
The IPTube•T1•C detects idle/redundant data within each DS0 resulting in a 56 to 1 bandwidth savings. TDM Over IP WAN bandwidth is not consumed by silent or redundant circuits and voice quality is not effected. Note: Compression only supported with IPTube-T1C model. 


Technical Specifications
IPTubeManual in PDF Format

LAN Network Interface:
One 10BaseT Ethernet

LAN Network Protocols Supported:
IP, TCP, UDP, ICMP, BOOTP

T1 Over IP Protocol:
• TDM Over IP
• Circuit Extension Over IP - CESOIP
• HDLC Over IP - HDLCOIP

• Frames Per Packet Configurable 8 to 56
   1 millisecond 8 T
1 frames
    7millisecond 56 T1 frames

Quality of Service:
Configurable IP Type of Service Bits
IANA Registered UDP Port 3175

T1/Fractional T1 Specifications:
Framing - ESF or D4
Coding - B8ZS or AMI

Supports DS0 assignments from 1 to 24


Regulatory:
· Safety -IEC60950
· EMC - CFR 47 Part 15 Sub Part B:2002
            EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

· Telecom - Part68

 

TFTP Upgrade Capable (Flash ROMs):
IPTube is operational during upgrade

Management:
Telnet support with Edit and Paste Templates
Console Port for Out of Band Management

SNMP support (MIB I, MIB II)

Remote configuration, monitoring, & reset

Console Port:
RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

24VAC, 1.0A; International Adapters Available
24-36 VDC Optional
-48 VDC Optional

Dimensions:
9" (L) x 7" (W) x 1.50" (H)

AC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: T1/DS1 Interface for connection to a PBX, Telecom Switch/Multiplexor



Console Port Connector
RJ 45 to DB 9 Female Adapter provided
24 VAC, 1.0A
  International Adapters Available

DC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: T1/DS1 Interface for connection to a PBX, Telecom Switch/Multiplexor


Console Port Connector
RJ 45 to DB 9 Female Adapter provided
15-26 VDC, 1.0A
  International Adapters Available

 

Engage Communication 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 Fax: (831) 688-1421 sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM