Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

• IP WAN Router with Four Integrated T1 DSU/CSUs •

IP•Express•QT1 is a high performance, bandwidth scalable, IP WAN router with 4 T1 ports offering a standards-based inverse multiplexing (N x T1) capability. The 4 T1 ports are able to connect to 4 remote locations or to be N x T1 inverse packet multiplexed to remote locations from 3 Mbps to 6 Mbps. Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability. IP•Express•QT1 Brochure in PDF

The IP•Express•QT1is a very reliable, high performance and cost effective IP WAN Router for interconnecting remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high performance MPEG Video delivery. The Integration of the T1 CSUs provides for a complete solution with a straight forward configuration. It is great for:

• MPEG Video Distribution
• Branch Office Connections
• Education District Networking
• Multimegabyte File Transfers

Inverse Packet Multiplexing
Inverse Packet Multiplexing is a feature of the IPExpress•QT1•IPM. IPM delivers 3 to 6 Megabits of interconnectivity over 2,3,4 Dedicated T1 WANs. IETF approved RFC1990 Multilink PPP protocol bonds multiple T1s into a high-speed virtual link that has built-in redundancy. T1 line fault detection provides resilient connectivity for Mission Critical Interconnects.


High Performance Fault Tolerant Internet Access
Internet Service Providers deploy the IP•Express•QT1 as a customer premise solution for customers that require Fault Tolerant NXT1 multimegabit access to the Internet. Industry Standard Multilink Point to Point Protocol ensures interoperability with the Internet Service Providers Point of Presence solution.

MPEG IP Multicast Streaming Video Delivery
IPExpress•QT1•IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed T1s. The Inverse Packet Multiplexor provides the bandwidth necessary for the delivery of 2 broadcast quality video feeds or to deliver near Contribution quality for a single MPEG Video. IP Multicast is a standard feature of the IPExpress•QT1 and is utilized to distribute MPEG video simultaneously to multiple decoders.

MPEG IP Video Redundancy Switch
REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IPExpress•QT1•IPM•RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed.

Headquarters IP WAN Router
The IPExpress•QT1 is a great solution for connecting four remote locations to a central site.

IPExpress•QT1



IP•Express•QT1 models packs 4 T1 WAN connectivity into 1/3 of a 19" wide rack

IPExpressQT1 Manual in PDF Format

Technical Specifications

LAN Network Interface:
• 10/100 BaseT Ethernet Port
• Autonegotiate or Configured Speed/Duplex

LAN Network Protocols Supported:
• IP, TCP, UDP, RIP, ICMP, BOOTP
• IP Multicast
• IP Video Stream Redundancy
   (Optional - RED models only)

Routing Protocols Supported:
• RIPv1, Static


WAN Network Interfaces:
• Four T1/FracT1 CSU/DSU ports
• Inverse Packet Multiplexing (Optional)


WAN Network Protocols Supported:

• PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
• Multilink PPP (IPM Models only)(RFC 1990)
• Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)


T1/Fractional T1 Specifications:
• Framing - ESF or D4
• Coding - B8ZS or AMI
• Supports DS0 assignments from 1 to 24
  (64Kbps to 1.536Mbps)

T1 Diagnostic:
• Loopback Test
   Network, Internal, Framer, Payload
• Bert Tests
   2E07,2E11,2E15,QRSS

TFTP Upgrade Capable (Flash ROMs):
IPExpressQT1 is operational during upgrade

Management:
Telnet support with Edit and Paste Templates
Console Port for Out of Band Management

SNMP support (MIB I, MIB II)

Remote configuration, monitoring, & reset

Console Port:
RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

• 12-24 VAC/VDC 1.0A
• Universal 90-240/50-60 Adapters Available
• Optional -48V 0.25 Amp
• Hot Standby with 2nd Power Module

Dimensions:
• 14" (L) x 5.5" (W) x 2.50" (H)

Regulatory:
• Safety -IEC60950
• EMC - CFR 47 Part 15 Sub Part B:2002
            EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

• Telecom - Part68
• CE

Standard Back Panel VAC/VDC


Rear Panel for Hot Standby Negative 48VDC Option


Engage Communication 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 Fax: (831) 688-1421 sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM