Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

· IP WAN Router V.35 RS530 RS232 ·

IP·Express·XL is a Wide Area Network router that routes the Internet Protocol through a synchronous serial WAN port. The V.35/RS530/RS232 WAN port support Point to Point and Frame Relay Wide Area Networking Protocols with 24/7 proven interoperability.

IP·Express·XLs are very reliable, high performance and cost effective IP WAN Routers for interconnecting remote LANs and for shared high performance Internet Access.
It is great for:

· Shared Internet Access · Branch Office Connections
· Education District Networking · Multimegabyte File Transfers

                                                                                  IPExpressXL Brochure in PDF Format

Technical Specifications


IPExpressXL Manual in PDF Format

LAN Network Interface:
· One10BaseT Ethernet

LAN Network Protocols Supported:
· IP, TCP, UDP, RIP, ICMP, BOOTP
· AppleTalk (Configuration Only)

WAN Network Interfaces:
· One V.35/RS530/RS232 synchronous port

WAN Network Protocols Supported:
· PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
· Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)		 TFTP Upgrade Capable (Flash ROMs):
· IPExpressXL is operational during upgrade

Management:
· Telnet support with Edit and Paste Templates
· Console Port for Out of Band Management
· SNMP support (MIB I, MIB II)
· Remote configuration, monitoring, & reset

Console Port:
· RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:
· 24VAC, 1.0A; International Adapters Available
· 24-36 VDC Optional
· -48 VDC Optional

Dimensions:
· 9" (L) x 7.3" (W) x 1.50" (H)

Back Panel AC

Adapter cable required for V.35 and RS449
Console Port Connector · RJ 45 to DB 9 Female Adapter provided


Standard 10BaseT Ethernet interface
V.35/RS530/RS232-1: Interface for WAN connectivity via PPP or Frame Relay

 

Engage Communication · 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 · Fax: (831) 688-1421 · sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM

 

IP·ExpressXL is used to connect Ethernet LANs to V.35/RS530/RS232 Telecommunication equipment such as Voice and Data multiplexors, Microwave, Modems, ISDN Terminal Adapters.....

Corporations and Government agencies select the IP·ExpressXL for its ease of installation and reliability.

Network Security is provided with Full On Source, Destination Address; Port and Flag IP Packet filtering. Interconnectivity is able to be selectively controlled at the network, device and application layers.

Network Address Translation is a standard feature of the IP·Express·XL. The NAT function performs IP Port Address Translation on a single global IP address. The NAT/PAT translation provides a type of firewall by only allowing communication to those connections that are established from the internal side of the network.

Management of the IP·Express·XL is accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. EngageView is a configuration application for AppleOS. SNMP MIB I and II support is a standard feature.