Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

SS7 Over IP Monitor with Mux

The IPTube•SS7•MonM•E1 encapsulates SS7 Call Detail Messages from SS7 Signalling nodes into IP packets for delivery to an SS7 Protocol analyzer. The IPTube•SS7•MonM•E1 provides for remote monitoring of SS7 based Telecom Switches systems via LANs, WANs, MANs, and Wireless Ethernet.

The IPTube•SS7•MonM•E1's E1 interface is connected to the E1 monitor interface of the Telecom Switch and is setup to monitor the SS7 traffic. At the Central Support Site an IPTube•SS7•MonM•E1 receives the SS7 Over IP packets and sends the SS7 Messages out its E1 interface to an SS7 Protocol Analyzer.

The IPTube•SS7•MonM•E1 connects to a E1 monitor port that has the SS7 communication from each switch on adjacent DS0s. The messages from each SS7 Signalling node are sent within IP Packets to an IPTube•SS7•MonM•E1 that is connected to the E1 interface of an SS7 protocol analyzer.
                                                               IPTube•SS7•MonM•E1 Brochure in PDF Format

    

Remote SS7 Switch Analysis
Telecommunication Service Providers utilize IPTube•SS7•MonM•E1s to facilitate the analysis of remote Telecom Switches over IP networks. A single centralized SS7 Protocol Analyzer is able to analyze a multisite network of Telecom switches that are connected with the IPTube•SS7•MonM•E1s.

SS7 protocol analyzer expertise is only required at the Central location. Analysis of an SS7 Telecom switch can be performed simply by enabling its IPTube•SS7•MonM•E1 to stream the SS7 messages to the IPTube•SS7•MonM•E1 connected to the SS7 protocol analyzer.

Low Cost IP Services with minimal Committed Information rates, such as DSL Internet, have sufficient bandwidth to deliver the SS7 Over IP packets. SS7 Over IP network bandwidth utilization is restricted to SS7 message encapsulation.

The Centralized SS7 protocol Analyzer is utilized for: Surveillance, Call Detail Records processing, Real-Time Signaling Network Monitor, Traffic Monitor and Analysis, Alarm management, Fraud Detection, Billing Verification, Revenue Assurance and Protocol Analysis: Call Tracing and Decoding.

Industry Standard SS7 Framer
The IPTube•SS7•MonM•E1 uses an industry standard SS7 Framer to receive and transmit SS7 messages. Minimal IP bandwidth is required to deliver SS7 since only the message data is encapsulated into IP packets.


Technical Specifications
IPTubeManual in PDF Format

LAN Network Interface:
One 10BaseT Ethernet

LAN Network Protocols Supported:
IP, TCP, UDP, ICMP, BOOTP

E1 Over IP Protocol:
• SS7 Over IP - SS7OIP

Quality of Service:
Configurable IP Type of Service Bits
IANA Registered UDP Port 3175

E1/Fractional E1 Specifications:
· Framing - CRC4 or FAS or UNFRAMED
· Coding - HDB3 or AMI
· Supports DS0 assignments from 1 to 31

Regulatory:
· Safety -IEC60950 Third Edition
              CB TEST CERTIFICATE
· EMC - EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

· Telecom - TBR12, TBR13
· CE

 

TFTP Upgrade Capable (Flash ROMs):
IPTube is operational during upgrade

Management:
Telnet support with Edit and Paste Templates
Console Port for Out of Band Management

SNMP support (MIB I, MIB II)

Remote configuration, monitoring, & reset

Console Port:
RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

24VAC, 1.0A; International Adapters Available
24-36 VDC Optional
-48 VDC Optional

Dimensions:
9" (L) x 7" (W) x 1.50" (H)

AC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: E1 Interface for connection to an SS7 Signalling Element



Console Port Connector
RJ 45 to DB 9 Female Adapter provided
24 VAC, 1.0A
  International Adapters Available

DC Power Back Panel

Standard 10BaseT Ethernet interface
Telco: E1 Interface for connection to an SS7 Signalling Element


Console Port Connector
RJ 45 to DB 9 Female Adapter provided
15-26 VDC, 1.0A
  International Adapters Available

 

Engage Communication 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 Fax: (831) 688-1421 sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM