Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

· SS7 Over IP Monitor with DAC ·

The IPTube•SS7•MonD•T1 encapsulates SS7 Call Detail Messages from SS7 Signalling nodes into IP packets for delivery to an SS7 Protocol analyzer. The IPTube•SS7•MonD•T1 provides for remote monitoring of SS7 based Telecom Switches systems via LANs, WANs, MANs, and Wireless Ethernet.

The IPTube•SS7•MonD•T1's T1 interface is connected to the T1 monitor interface of the Telecom Switch and is setup to monitor the SS7 traffic. At the Central Support Site an IPTube•SS7•SIG•T1 receives the SS7 Over IP packets and sends the SS7 Messages out its T1 interface to an SS7 Protocol Analyzer.

The IPTube•SS7•MonD•T1 has two T1 interfaces that are Digitallly Cross Connected. One T1 connects to the SS7 equipment's T1 link and the other connects to the T1 line. The SS7 communication channel between each of the SS7 nodes is tapped and the messages from each SS7 Signalling node are sent to an IPTube•SS7•SIG•T1 that is connected to the T1 interface an SS7 protocol analyzer.
                                                                    IPTube•SS7•MOND•T1 Brochure in PDF Format

        

Centralized SS7 protocol Analyzer
The Centralized SS7 protocol Analyzer is utilized for: Surveillance, Call Detail Records processing, Real-Time Signaling Network Monitor, Traffic Monitor and Analysis, Alarm management, Fraud Detection, Billing Verification, Revenue Assurance and Protocol Analysis: Call Tracing and Decoding.

Industry Standard SS7 Framer
The IPTube•SS7•MonD•T11 uses an industry standard SS7 Framer to receive and transmit SS7 messages. Minimal IP bandwidth is required to deliver SS7 since only the message data is encapsulated into IP packets.


Technical Specifications
IPTubeManual in PDF Format

LAN Network Interface:
One 10BaseT Ethernet

LAN Network Protocols Supported:
IP, TCP, UDP, ICMP

T1 Over IP Protocol:
• SS7 Over IP - SS7OIP

Quality of Service:
Configurable IP Type of Service Bits
IANA Registered UDP Port 3175

T1/Fractional T1 Specifications:
Framing - ESF or D4
Coding - B8ZS or AMI

Supports DS0 assignments from 1 to 24


Regulatory:
· Safety -IEC60950
· EMC - CFR 47 Part 15 Sub Part B:2002
            EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

· Telecom - Part68

 

TFTP Upgrade Capable (Flash ROMs):
IPTube is operational during upgrade

Management:
Telnet support with Edit and Paste Templates
Console Port for Out of Band Management

SNMP support (MIB I, MIB II)

Remote configuration, monitoring, & reset

Console Port:
RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

12-36 VDC
-48 VDC Optional

Dimensions:
9" (L) x 7" (W) x 1.50" (H)

Back Panel

Console Port Connector RJ 45 to DB 9 Female Adapter provided
Telco1: T1 Telecom Circuit Interface RJ48S


4 Port 10BaseT Ethernet Hub   DS1: T1 Connection to SS7 Signalling Node  

Power
12-36 VDC
-48 VDC Optional

 

Engage Communication 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 Fax: (831) 688-1421 sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM