Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

# Config File Name
# IPTT1fracwanINT.txt
# Command Line Listing
Host Name IP•Tube-T1 Master Clock
IP Default-router 192.168.1.4
Interface E1
# IP Address of this IP•Tube
IP Address 192.168.1.1/24
# Ethernet Broadcast/Multicast Reception Control
BroadcastRCV ON
Interface S1
Type T1
# Tube Parameters
Protocol IPTube
Tube On
Tube Framing Transparent
# IP Address of remote IP•Tube
Tube Address 192.168.2.1
Tube UDPPort 3175
Tube TOS 0x08
Tube Buffers 5
Tube FPP 8
# Tube Destination Ethernet Address Resolution
Tube Ethernet ARP On
Tube Ethernet Address

# T1 Parameters
T1 Data Normal
# T1 Transmit timing set to Internal
T1 Clocking Internal
T1 LBO CSU 0dB
T1 Framing ESF
T1 Coding B8ZS
T1 IdleCharacter 0x7F
# START CHANNEL NUMBER OF CHANNELS
T1 Channels Fractional 1 8

 

Example 2: IP•Tube Fractional T1: 8 DS0s without T1 Framing Bits

Scenario
This sample configuration details an IP•Tube interconnect of a fractional T1 without framing bits. DS0 1 through 8 are transported. This IP•Tube is set to internal timing as the master clock of the IP•Tube's T1 connection. The remote IP•Tube must be set to use its Phase Lock Loop to match this frequency. Note: the remote IP•Tube is across a WAN whose IP address range is 192.168.2.x. The WAN router address is 192.168.1.4 this is the address for the Default Router.