Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

# Config File Name
# IPT530_nbft.txt
# Command Line Listing
Host Name IPTube-530
IP Default-router
Interface E1
# IP Address of this IP•Tube
IP Address 192.168.1.1/24
Interface S1
Type RS-530
SCR Normal
SCT Normal
Protocol IPTube
Tube On
# IP Address of the Remote IP•Tube
Tube Address 192.168.1.2
Tube TOS 0x08
Tube FPP 10
Tube Clock Internal
Tube SCRCLOCK MODE NX64K
Tube SCRCLOCK FACTOR 32
Tube SCTCLOCK MODE NX64K
Tube SCTCLOCK FACTOR 31
Tube Buffer 0
Tube Interval 0
Tube Percentage 100

 

Example 7: IP•Tube RS530 at 2.048 Mbps

Scenario
This sample configuration details an IP•Tube RS530 model which connects to a data encryption device via RS-530 at a clocking rate of 2.048 Megabits per second. The IPTubes Ethernet interconnection has a committed information rate that is much greater than the IPTube maximum data rate. Therefore the Ethernet bandwidth available is relatively unlimited.
The SCRCLOCK will be set to run at 64Kilobits faster than the SCTCLOCK 1.984 Mbps so that Tube Buffering is not required and the latency is minimized to the time required to load up the IP packet.
For this example, the user will select Frames-Per-Packet = 10. With this TUBE FPP setting, the Overhead Table in Chapter 6 indicates an approximate 7% (ratio is 1.069) overhead. IPTube Ethernet Data rate is 1.069 times 1.984 Mbps