Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

· Multiprotocol WAN Router with Two E1 DSU/CSUs ·

ExpressRouter·MLE is a Wide Area Network router that routes the Internet Protocol, AppleTalk and IPX through 2 independent or inverse multiplexed E1 WAN ports. The E1 WAN ports support Point to Point and Frame Relay Wide Area Networking Protocols with 24/7 proven interoperability.

ExpressRouterMLE PDF Brochure

ExpressRouter·MLE is a very reliable, high performance and cost effective IP WAN Router for interconnecting two remote LANs and for shared high performance Internet Access. The Integration of the E1 CSUs provides for a complete solution with a straight forward configuration. It is great for:

· Shared Internet Access
· Branch Office Connections
· Education District Networking
· Multimegabyte File Transfers

2 Independent Connections


Inverse Multiplexing is an optional feature of the ExpressRouter·MLE. The Inverse Multiplexor delivers 4 Megabits of interconnectivity over Dedicated and Frame Relay WANs. Built in E1 line fault detection provides for automatic bandwidth backup. The Inverse Multiplexor is ideal for:

· Very Large Multimegabyte File Transfers
· Mission Critical Fault Tolerant Interconnects
· IP Video Streams

4Mbps Inverse Multiplexed Fault Tolerant Connection

Technical Specifications


IPExpressMLE Manual in PDF Format

LAN Network Interface:
· One 10BaseT Ethernet

LAN Network Protocols Supported:
· IP, TCP, UDP, RIP, ICMP, BOOTP
· IPX (RIP, SAP)
· AppleTalk
  (DDP, RTMP, ZIP, NBP, ATP, ADSP, AEP)
· NAT/PAT (RFC 1631)

WAN Network Interfaces:
· Two E1/FracE1 CSU/DSU port

WAN Network Protocols Supported:
· PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
· Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)

E1/Fractional E1 Specifications:
· Framing - CRC4 or FAS
· Coding - HDB3 or AMI
· Supports DS0 assignments from 1 to 31		 TFTP Upgrade Capable (Flash ROMs):
· IPExpressMLE is operational during upgrade

Management:
· Telnet support with Edit and Paste Templates
· Console Port for Out of Band Management
· SNMP support (MIB I, MIB II)
· Remote configuration, monitoring, & reset
· EngageView is a configuration application for    AppleOS

Console Port:
· RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:
· 24VAC, 1.0A; International Adapters Available

Dimensions:
· 9" (L) x 5.5" (W) x 1.50" (H)

Back Panel

E1-1: E1 DSU/CSU Interface for WAN connectivity via PPP or Frame Relay
Console Port Connector · RJ 45 to DB 9 Female Adapter provided


E1-2: Second E1 DSU/CSU Interface for WAN connectivity via PPP or Frame Relay
Standard 10BaseT Ethernet interface

 

Engage Communication · 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 · Fax: (831) 688-1421 · sales@engageinc.com

© Copyright 1989-2005 Engage Communication, Inc. Engage Communication has moved to WWW.ENGAGEINC.COM

 

The ExpressRouter·MLE is ideal for:

Shared Internet Access - that grows with your needs

High-Performance WWW Servers - fast and reliable

Branch Office Connectivity - with room for expansion

Education District Networking - when ease of use is a must

Very Large File Transfers - when throughput counts

Remote Client/Server Applications - for high traffic demands.

Network Security is provided with Full On Source, Destination Address; Port and Flag IP Packet filtering. Interconnectivity is able to be selectively controlled at the network, device and application layers.

Network Address Translation is a standard feature of the ExpressRouter·MLE. The NAT function performs IP Port Address Translation on a single global IP address. The NAT/PAT translation provides a type of firewall by only allowing communication to those connections that are established from the internal side of the network.

Management of the ExpressRouter·MLE is accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. EngageView is a configuration application for AppleOS. SNMP MIB I and II support is a standard feature.