Has moved to www.engageinc.com

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

   
 

· Mutiprotocol WAN Router with an Integrated T1 DSU/CSU ·

ExpressRouter·XLT is a Wide Area Network router that routes Internet Protocol, AppleTalk and IPX through an integrated T1 WAN port. The T1 WAN port support Point to Point and Frame Relay Wide Area Networking Protocols with 24/7 proven interoperability.

ExpressRouterXLT PDF Brochure

ExpressRouter·XLTs are very reliable, high performance and cost effective IP WAN Routers for interconnecting remote LANs and for shared high performance Internet Access. The Integration of the T1 CSUs provides for a complete solution with a straight forward configuration. It is great for:

· Shared Internet Access
· Branch Office Connections
· Education District Networking
· Multimegabyte File Transfer                                                              


ExpressRouter·XLT are used extensively with Frame Relay WANS for high performance branch office connectivity and Internet access. Internet Service Providers deploy the ExpressRouterXLT as a customer premise solution. Corporations and Government agencies select the ExpressRouterXLT for its ease of installation and reliability.

Technical Specifications


IPExpressXLT Manual in PDF Format

LAN Network Interface:
· One10BaseT Ethernet

LAN Network Protocols Supported:
· IP, TCP, UDP, RIP, ICMP, BOOTP
· IPX (RIP, SAP)
· AppleTalk
  (DDP, RTMP, ZIP, NBP, ATP, ADSP, AEP)
· NAT/PAT (RFC 1631)

WAN Network Interfaces:
· One T1/FracT1 CSU/DSU port

WAN Network Protocols Supported:
· PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
· Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)

T1/Fractional T1 Specifications:
· Framing - ESF or D4
· Coding - B8ZS or AMI
· Supports DS0 assignments from 1 to 24
  (64Kbps to 1.536Mbps)		 TFTP Upgrade Capable (Flash ROMs):
· IPTube is operational during upgrade

Management:
· Telnet support with Edit and Paste Templates
· Console Port for Out of Band Management
· SNMP support (MIB I, MIB II)
· Remote configuration, monitoring, & reset
· EngageView is a configuration application for    AppleOS

Console Port:
· RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:
· 24VAC, 1.0A; International Adapters Available

Dimensions:
· 9" (L) x 5.5" (W) x 1.50" (H)

Back Panel

T1-1: T1 DSU/CSU Interface for WAN connectivity via PPP or Frame Relay
Console Port Connector · RJ 45 to DB 9 Female Adapter provided

IPTubeT1BrochureHTML111PCT3.JPG (10795 bytes)

T1-2: Factory Upgrade Option for 2nd T1 DSU/CSU Interface
Standard 10BaseT Ethernet interface

 

Engage Communication · 9565 Soquel Drive, Aptos, CA 95003
Tel: (831) 688-1021 · Fax: (831) 688-1421 · www.engagecom.com

 

The ExpressRouter·XLT is ideal for:

Multiprotocol Wide Area Networking via T1

Shared Internet Access - that grows with your needs

High-Performance WWW Servers - fast and reliable

Branch Office Connectivity - with room for expansion

Education District Networking - when ease of use is a must

Very Large File Transfers - when throughput counts

Remote Client/Server Applications - for high traffic demands.

Network Security is provided with Full On Source, Destination Address; Port and Flag IP Packet filtering. Interconnectivity is able to be selectively controlled at the network, device and application layers.

Network Address Translation is a standard feature of the ExpressRouter·XLT. The NAT function performs IP Port Address Translation on a single global IP address. The NAT/PAT translation provides a type of firewall by only allowing communication to those connections that are established from the internal side of the network.

Management of the ExpressRouter·XLT is accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. EngageView is a configuration application for AppleOS. SNMP MIB I and II support is a standard feature.